Call Giltron (508) 359-4310

HORNS/

PROBES (continued)

BOOSTER HORNS Booster Horns attach between the convertor and standard horn and are used to increase amplitude/intensity of standard horns by the gain ratio indicated. Part #  For Use With  Gain Ratio 328A All Standard Horns 2 to 1 328B 3/4" and 1" Standard Horns Only 2.5 to 1 328C 1" Standard Horns Only 3 to 1

---

 

MICROTIP HORNS All Microtip Horns must only be used as extensions of the standard 1/2" tapped horn, part # 200 with the exception of the special Stepped Microtip part # 420.    Part # Processing Vol Tip Diameter  Type Intensity Amplitude Length  418 0.2-5 ml 1/16" (1.6mm) Tapered Ultra High 320 um 7" (17.8 cm)  419 0.5-15 ml 1/8" (3.2 mm) Tapered Ultra High 240 um 6 1/2" (16.5 cm) 419A 2-25 ml 3/16" (4.8 mm) Tapered Very High 150 um 6 1/8"(15.5 cm) 419B 5-50 ml 1/4" (6.4 mm) Tapered High 115 um 5 7/8" (14.9 cm) 420 0.5-15 ml 1/8" (3.2 mm) Stepped Very High 205 um 5 1/2" (14 cm) Double (peak to peak) Amplitudeof the radiating face of the tip in micrometers on Sonicatros operating at output control setting 5 Part 420 is a two piece probe     HORN EXTENDERS   Some applications may require the use of long-necked vessels which will not accommodate the standard probe due to their length. To process using such vessels horn externders are available. For assistance in selecting the appropriate extender for your application, please call Giltron.