Technical Data

Horns/

Probes

 

Horns

Standard

 

Horns are made of titanium and are offered in 2 different versions.

 

Solid horns are constructed of a single piece of Titanium.Tapped horns are furnished with replaceable tips. Tips are available in solid titanium or in Sapphire coated titanium (Sapphire coating extends tip life.

 

Note: consult charts below for available options.

 

Standard  Part 1 Proc Vol Tip Diam Type  Intensity  Amplitude  200  10-250 ml  1/2"(12.7mm) Tapped  High  120um  201  10-250 ml 1/2"(12.7mm   Solid  High  120um  201S  10-250 ml  1/2"(12.7mm Sapphire  High  120um    207 25-500 ml 3/4"(19.1 mm)  Tapped  Medium  60um  208  25-500 ml 3/4"(19.1 mm)  Solid  Medium  60um  208S 25-500 ml 3/4"(19.1 mm)  Sapphire  Medium  60um   209  50-1000 ml  1"(25.4mm)  Tapped low  30um 210  50-1000 ml  1"(25.4mm)  Solid low 30um 210S  50-1000 ml  1"(25.4mm)  Sapphire low  30um

 

HIGH INTENSITY

 

High Intensity horns generate twice the amplitude (and higher intensities) when compared with standard horns of the same diameter.

 

HIGH INTENSITY

 

Part #  Processing Volume  Tip Diameter  Type  Intensity Amplitude  305 25-500 ml 3/4"(19.1mm)  Tapped High 120 um  310 50-1000 ml 1"(25.4mm) Solid Medium 60 um  311 50-1000 ml 1"(25.4mm) Tapped Medium 60 um

 

Double (peak-to-peak) amplitude of the radiating face of the tip in micrometers on Sonicators operating at output control setting 10.

 

Processing volumes may be doubled by using a magnetic stir bar

 

REPLACEMENT TIPS

Solid Titanium Only

Part #406 for 1/2" (12.7 mm) Tapped horns

Part #407 for 3/4 " (19.1 mm) Tapped horns

Part #408 for 1" (25.4 mm) Tapped horns

Horns/Probes continued

 

Back

Home

Next